1W Indoor WIFI Booster 2.4G MIMO 2 Channel Wireless Internet Signal Amplify
Product Description:
MXT's series 2.4G wlan power amplifier developed is a new type of amplifier designed for wireless local area networks. It includes a low noise receiving amplifier and a transmitting power amplifier, with high gain and low noise characteristics, supporting 802.11g OFDM modulation, combined with TDD (Time Division Duplex) technology to enhance WLAN signal power. Reasonable use can increase the transmission distance by 3-5 times on top of the original transmission.
Features:
1.Brand new and high quality.
2. Low-noise receive gain 3.0dB .
3. Led status: mix red with green(transmit) / Green(receive)
4. High Gain, High Value, High Performance.
5. Wide Working Voltage 9-15V.
6. Plug-and-play, Easy installation, no driver needed.
7. Ideal for increase the 2400-2483 MHz frequency devices. Adopt Time Division uplex ( TDD )
8. Increase the effective range and coverage area of your Wi-Fi network.
9. Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only).
Technical Parameters:
| Item |
Specification |
| Frequency Range |
2400~2483MHz |
| Supported standards |
IEEE 802.11b/g/n |
|
Channel width
|
20Mhz&40Mhz
|
| Output Power |
1W (0.5W on 2 channel) |
| Input power |
0 ~ 10 dBm |
| Tx Gain |
18 dB |
| Rx Gain |
15 dB |
| Gain Flatness |
≤1dB |
| Noise figure |
≤3.0dB Typical |
| DC Current |
≤2A@12VDC |
| Size(DxWxH) |
115 x80 x 20 mm |
| In/Out Commector |
SMA Female |
| Operation mode |
Bi-directional, half-duplex, time division duplex |
| Operation Temp. |
-20 ~ +65 (°C) |
| LED light |
Power status LED and activity status LED
|
| Supply Voltage |
12V |
| Weight |
200g |
Applications:
The MXT's series Bidirectional amplifier is installed adjacent to the antenna, and its receiving amplifier can amplify the signal received by the antenna. Due to the application of low noise amplification technology, the receiving sensitivity can be improved several times. The transmitting power amplifier can be activated by a signal as low as -5dBm, and the automatic gain AGC control circuit can stabilize the output power. Therefore, it can effectively compensate for losses caused by the use of long cables. The transceiver switch can automatically switch the transmission and reception links without manual intervention.
Outdoor product, equipped with a dedicated power injector, delivers the DC power required for amplifier operation to the amplifier through a high-frequency feeder. This can improve the safety of the amplifier when installed outdoors and improve the stability of the system.
Customization:
Customized RF Power Amplifier Service
We provide customized RF Power Amplifier Service according to your requirements. Our Model Number is WLAN2400T2483M 0.5W-12V. which is made in China. The Minimum Order Quantity is 2. The price is negotiable.
The 2.4G wifi signal amplifier series has different power levels of 0.5w, 1w, 2w, 5w, and 10w. Indoor and outdoor models can be selected, and the power supply methods are flexible and diverse. It can be directly powered by DC power supply, and can be powered by outdoor power amplifiers through feed boxes. It can also be powered by POE power supply
Support and Services:
RF Power Amplifier Technical Support & Services
We offer technical support and services for our RF Power Amplifier products to ensure that they are functioning properly and providing the best possible performance.
Installation & Setup
We are available to provide assistance with the installation and setup of your RF Power Amplifier. Our team of experienced engineers can guide you through the process and answer any questions you have.
Troubleshooting
If you are experiencing any issues with your RF Power Amplifier, our team of experts can help identify the source of the problem and provide you with solutions to resolve it quickly.
Your message must be between 20-3,000 characters!
